TRENDnet User's Guide
ROI
ROI (Region of Interest) encoding helps to discriminate the ROI and
background information in video compression, which means, the technology
assigns more encoding resource to the region of interest, thus to increase the
quality of the ROI whereas the background information is less focused.
© Copyright TRENDnet. All Rights Reserved.
Note: ROI function varies according to different camera models.
Steps:
1.
2.
3.
4.
5.
Enter the ROI settings interface: Configuration > Video/Audio > ROI.
Select the Stream Type for ROI encoding.
Check the checkbox of Enable under Fixed Region item.
Set Fixed Region for ROI.
(1) Select the Region No. from the drop‐down list.
(2) Check the Enable checkbox to enable ROI function for the chosen
region.
(3) Click Drawing. Click and drag the mouse on the view screen to draw
a red rectangle as the ROI region. You can click Clear to cancel
former drawing. Click Stop Drawing when you finish.
(4) Select the ROI level.
(5) Enter a region name for the chosen region.
(6) Click Save the save the settings of ROI settings for chosen fixed
region.
(7) Repeat steps (1) to (6) to setup other fixed regions.
Set Dynamic Region for ROI.
(1) Check the checkbox to enable Face Tracking.
Note: To enable face tracking function, the face detection function
should be supported and enabled.
(2) Select the ROI level.
TV‐IP1328PI
27