2. Hardware Installation 1. Attach the antenna to the IP Camera. 2. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port on the IP Camera. 3. Connect the Power Adapter to the IP Camera and then to a power outlet. 4.
1. Insert the Utility CD-ROM into your CD-ROM drive. 2. Click Run autorun.exe (Windows 7/Vista only). 3. Click IPSetup. 4. Follow the Installation Wizard instructions and then click Close. 5. Click the Start / Windows Icon. Go to ProgramsŽ TRENDnet Ž IP Setup and click IP Setup.
Page 6
Note: By default, the IP setting on the TV-IP121WN is set to DHCP. Please skip to step 10. If you want to give the TV-IP121WN static IP address, continue on to step 6. 6. Select the IP Camera and click Change IP. 7.
Page 7
10. Double click the IP Camera to access the browser configuration. 11. Enter the User name and Password, and then click OK. User Name: admin Password: admin 12. Right click on the yellow bar and click Install This Add-on for All Users on This Computer (Internet Explorer 8) or Install ActiveX Control (Internet Explorer 6/7) 13.
Page 8
For detailed information regarding the TV-IP121WN ’s configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register...
(see step 10 in Section 3: Configure the IP Camera. If you do not have a DHCP server on your network, the default IP address is 192.168.10.30. The default administrator ID and password is admin. If you still encounter problems or have any questions regarding the TV-IP121WN, please contact TRENDnet's Technical Support Department.
Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues.
Page 11
2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. 3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall.
Page 13
Informations générales GPL/LGPL Ce produit TRENDnet comprend un logiciel libre écrit par des programmeurs tiers. Ces codes sont sujet à la GNU General Public License ("GPL" Licence publique générale GNU) ou à la GNU Lesser General Public License ("LGPL" Licence publique générale limitée GNU).
Page 14
General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os detalhes do GNU GPL e do LGPL estão no CD-ROM do produto.