Table of Contents
Advertisement
PRODUCT SPECIFICATIONS
Cordless pole pruner
Model
Voltage
No-load chain speed
Bar length
Chain pitch
Chain gauge
Chain type: Low profile skip tooth narrow kerf
Weight (without battery pack)
Weight (with heaviest battery pack)
Vibration level (in accordance with EN ISO 11680-1)
Vibration value
Uncertainty
Noise emission level (in accordance with EN ISO 11680-1)
A-weighted sound pressure level at the
operator's position
Uncertainty
Declared A-weighted sound pressure level
at the operator position
A-weighted sound power level
Uncertainty
Declared A-weighted sound power level
BATTERY AND CHARGER
Model
RPP3600
Battery pack
Charger
BPL3612D, BPL3615, BPL3626,
BPL3640,BPL3626D, BPL3640D,
Compatible battery
BPL3650D, BPL3626D2, BPL3640D2,
packs
BPL3650D2, BPL3660D, BPL3690D,
R36BTY2, R36BTY4, R36BTY5,
R36BTY6, R36BTY8, R36BTY12
NOTE: Visit your local special orders desk or contact RYOBI
customer service for replacement parts.
RPP3600
36 V d.c.
5.5 m/s
203 mm (8 in.)
3/8 in.
0.043 in.
4.4 kg
7.1 kg
1.3 m/s
2
K = 1.5 m/s
2
L
= 77.6 dB(A)
pA
K = 3.0 dB
81 dB(A)
= 92.1 dB(A)
L
WA
K = 3.0 dB
96 dB(A)
R36PPS114
-
R36BTY4
-
BCL3617S
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may significantly increase the
exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise
should take into account the times when the tool is turned off
or when it is running idle. These conditions may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.
Advertisement
Table of Contents
