Replacing The Chain - Ryobi R36PPS114 Manual

REPLACING THE CHAIN

1. Remove the battery pack.
2. Using the hex key, loosen the bar bolt of
the sprocket cover.
3. Remove the sprocket cover and guide
bar.
4. Dispose of the old chain and prepare the
new one.
5. Fit the chain over the sprocket and into
the bar groove. The cutters on the top of
the guide bar should face toward the bar
tip, in the direction of the chain rotation.
NOTE: Make sure that the chain is fitted
into the sprocket.
12
Maintenance
1
2
1
3
4
5
1
2
2