Introduction
1 Introduction
Each controlCARD comes with a Hardware Developer's Kit, which is a full set of files necessary to evaluate and
develop with a C2000 device. These files include:
•
Schematics – Designed in Altium
•
Bill of Materials (BOM)
•
Layout PCB files - Designed in Altium
•
Gerber files
The Hardware Developer's Kit for the controlCARD can be found in the
- <install directory>\c2000\C2000Ware_x_xx_xx_xx\boards\controlCARDs\TMDSCNCD28P65X\Rx_x
This kit is designed to explore the functionality of the F28P65x microcontroller. The controlCARD
can be treated as a good reference design and is not intended to be a complete customer design.
Full compliance to safety, EMI/EMC, and other regulations are left to the designer of the customer's
system.
2
TMDSCNCD28P65X controlCARD Information Guide
Figure 1-1. F28P65x controlCARD
Note
Copyright © 2023 Texas Instruments Incorporated
C2000Ware
at the following location:
SPRUJ90A – MARCH 2023 – REVISED JULY 2023
Submit Document Feedback
www.ti.com