Advertisement
(A) Attach control panel to cart with #10-24x1-3/4" machine screws and #10-24 wing nuts.
7
(B) Place valve/hose/regulator onto control panel. Attach with two #10-24x1/2" machine screws. (Note: Make sure the two
valve stems are leveled; otherwise, this can cause main burner level problems.) Insert ignitor into control panel. Insert the round
terminal lug of the ignitor wire into the pin located at the end of the ignitor.
16 • 473741008
Qty: 2
#10-24x1-3/4"
Machine Screw
#10-24
Wing Nut
Qty: 2
#10-24X1/2"
Machine Screw
Qty: 2
A
B
Valve/Hose/Regulator
Control Panel
Ignitor
Advertisement
