Advertisement
Right leg, place support bar between legs, and place two rails on outside of leg. Attach with #10-24x1-3/4"
3
machine screws and #10-24 wing nuts. On left leg attach rail as shown.
Qty: 8
#10-24x1-3/4"
Machine Screw
Qty: 8
#10-24
Wing Nut
Turn assembly upside-down. Insert axle into wheel. Facing the back, position tank support bracket between left legs. Insert
4
axle through leg and bracket and secure with hitch pin.
1" Hitch Pin
Qty. 1
"Cone" side of wheel against leg
14 • 473741008
Place rail with rating
label to back.
Axle
Wheel
Right Leg
Support Bar
Rail
Hitch Pin
Advertisement
