Advertisement
ASSEMBLY – Model No. 473741008
(A) Place leg shelf support onto leg with leg extender. Attach each side with #10-24x1-3/4" machine screw and
1
#10-24" wing nut.
(B) Attach one support bar to legs with #10-24x1-3/4" machine screws and #10-24 wing nuts.
NOTE: Do not tighten screws until Step 5.
Qty: 6
#10-24x1-3/4"
Machine Screw
Qty: 6
#10-24
Wing Nut
(A) Place the leg shelf support with match holder onto leg as shown. Attach another leg support to other leg with no leg
2
extender. Attach each side with #10-24x1-3/4" machine screw and #10-24" wing nut.
(B) Attach one support bar to the upper part of leg with #10-24x1-3/4" machine screws and #10-24 wing nuts.
NOTE: Do not tighten screws until Step 5.
Qty: 6
#10-24x1-3/4"
Machine Screw
Qty: 6
#10-24
Wing Nut
Leg Shelf Support
A
Right leg
Pay attention to the orientation of
Right Leg during assembly
Leg Shelf
Support
A
Left leg
no leg extenders
Insert Thread
Match Holder
Insert Thread
Pay attention to the
orientation of Right Leg
during assembly
Support Bar
B
Support Bar
B
473741008 • 13
Advertisement
