Preparation
The Preparation section explains what the administrator
has to prepare for monitoring the images after
installation and connection of the camera.
Connecting to a
Computer or a Network
To connect to the computer, use a commercially
available network cable (cross cable).
To connect to the network, use a commercially available network
cable (straight cable).
Connecting the Camera to a
Computer
Using a commercially available network cable (cross),
connect the LAN port on the camera to the network
connector of a computer.
SNC-CS11 (rear)
SEE INSTRUCTION MANUAL
LAN
1
2 3 4
NTSC PAL
TEST OUT
NETWORK
POWER
–
CLASS 2 WIRING
1
LAN
Network cable
(cross, not supplied)
Network
connector
Computer
DC 12V
+
AC 24V
2
Connecting the Camera to a Local
Network
Using a commercially available network cable, connect
the LAN port on the camera to a hub in the network.
SNC-CS11 (rear)
SEE INSTRUCTION MANUAL
LAN
1
TEST OUT
NETWORK
POWER
CLASS 2 WIRING
LAN
Network cable
(straight, not
supplied)
Hub
Network
Connecting to a Computer or a Network
2 3 4
NTSC PAL
–
DC 12V
+
AC 24V
1
2
10BASE-T/
100BASE-TX
7