Main Menu; Camera Control Section - Sony IPELA SNC-CS10 User Manual

Main menu

Setting
Click to display the Administrator menu. (page 27)
You can operate this function only when logging in as
the administrator.
Home
Displays the Welcome page.
Player
Click to download the "SNC video player" application
program built in the camera. The SNC video player
allows you to play video data recorded on the camera
with your computer. (See "Using the SNC video player
— Playing Video File Recorded on Camera" on page
66.)

Camera Control Section

Frame rate
(Displayed only when the camera Video mode (page 32)
is set to JPEG.)
Selects the frame rate to transmit images. (page 22)
View size
Selects the view size to be displayed. (page 23)
Digital zoom
Click to change the size of the digital zoom. (page 23)
Capture
Click to capture a still image shot by the camera and to
store it in the computer. (See "Capturing a Monitor
Image" on page 23.)
Trigger
(Displayed only when the camera Viewer mode
(page 41) is set to Full and one or more triggers are
enabled in the Trigger menu (page 53).)
Select the function you want to use from the drop-down
list and click . The selected function is activated.
The selectable functions are as follows:
– send the still image files attached to an e-mail
(page 24)
– send the still image files to an FTP server (page 24)
– record the still image files in the built-in memory
(page 25)
– switch the alarm output on/off (page 25)
Transmission (Switching the TCP/
UDP transmission mode)
(Displayed only when the camera Video mode (page 32)
is set to MPEG4 and using the ActiveX viewer.)
Each click switches the transmission mode of the video
data among TCP mode, UDP (Unicast) mode and UDP
(Multicast) mode. (page 26)
The last selected mode is saved in the computer, and will
stay selected for the next starting.
Volume (SNC-CS11 only)
(Displayed when the Microphone (page 33) is set to
On.)
Drag the bar of to adjust the volume.
When you click , the icon changes to
audio output stops. To output the audio, click
Note
If the is not displayed due to the use of using
Java applet viewer, Audio codec may not be set
G.711(64kbps) (page 34) or Java may not be installed
correctly.
To check if Java is installed correctly, refer to "Java
applet viewer" of "About Viewers" on page 19.
and the
again.
21
Configuration of Main Viewer