Setting The Motion Detection Function; Motion Detection Menu - Sony IPELA SNC-CS10 User Manual

Note
The value of Recording capacity differs depending on
Image size, Bit rate (for MPEG4) and Image quality (for
JPEG) in the camera menu.
OK/Cancel
See "Buttons common to every menu" on page 28.
56
Setting the Motion Detection Function — Motion detection Menu
Setting the Motion
Detection Function

— Motion detection Menu

When you click Motion detection on the Administrator
menu, the Motion detection menu appears.
You can set the conditions to activate the built-in motion
detection function in this menu.
This is the same menu with the menu which is displayed
when you click Motion detection in Alarm sending of
e-Mail (SMTP) menu, Alarm sending or FTP client
menu, Alarm recording of Image memory menu and so
on.
Notes
• Motion detection works only when the Video mode is
set to MPEG4 and the Cropping is set to Off.
• Before actual use, perform an operation test and
confirm that the Motion detection function works
correctly.
Monitor display
You can monitor the moving image and set the detection
Window.
Window 1 to 4 check box
When you check it, the specified Window is displayed
on the monitor display.
Threshold slider bar
Set the Threshold level so as to judge whether there has
been any motion in the camera image or not. You can
change the Threshold level displayed in the Motion
detection indicator.