Sony IPELA SNC-CS10 User Manual page 65

The audio file name will be "RecordedFile" + "Voice
alert number" + ".vof" if you upload an audio file
recorded using and not stored in the computer.
Notes
• The voice alert number select is disabled if the camera
specified in the Setting tab has old-version software.
• The audio file name for the camera selected in the
camera list is displayed here. To check the uploaded
file name, click on the camera in the camera list.
• The audio file is uploaded to the same voice alert
number on all the cameras in the camera list. If the
camera has old-version software, the audio file is
automatically uploaded to voice alert number 1.
(upload)
Click to upload the recorded or selected audio file to the
camera specified in the Setting tab. Only one audio file
can be uploaded to the camera at a time.
Note
Uploading a new audio file overwrites the audio file
previously uploaded to the camera.
Click this button to hide the camera list. Click it again to
display the camera list.
Target camera(s) (Camera list)
Displays the cameras selected with the camera select
checkbox of the camera list in the Setting tab.
The list shows the information and status of the selected
cameras.
IP address: Displays the IP address of the network
camera. "DHCP" is shown at the end of the IP
address when the IP address is obtained with a
DHCP server.
Model: Displays the model name of the network
camera.
Serial: Displays the serial number of the network
camera.
Progress: Displays the progress of audio file
transmission.
Status: Displays the current status of the camera.
Ready: The camera is ready for connection.
Inquiry: The camera information is being asked for.
No func: The camera does not support the Voice
alert function.
Uploading: The audio file is being uploaded.
Fault: The audio file uploading is unsuccessful.
Succeeded: The audio file uploading is successful.
Uploading the recorded audio file to the
camera
Tip
Before operating, create an audio file and set the camera
for audio uploading. Set the camera using the Setting
tab.
1
Click
start recording.
2
Click
Recording will stop automatically in 30 seconds.
3
Select the voice alert number.
4
Click
camera.
Saving the recorded audio file to the
computer
1
Click
start recording.
2
Click
Recording will stop automatically in 30 seconds.
3
Click
The Save as dialog appears. Type the file name and
save it.
Uploading the saved audio file to the
camera
1
Click
select the audio file to be uploaded.
2
Select the voice alert number.
3
Click
camera.
Using the SNC audio upload tool — Transmitting Audio to Camera (SNC-CS11 only)
(recording) in the Voice alert tab to
(stop) to stop recording.
(upload) to transmit the audio file to the
(recording) in the Voice alert tab to
(stop) to stop recording.
(save).
(file open) in the Voice alert tab and
(upload) to transmit the audio file to the
65