Reset Tab; Configuring The Network - Network Menu; Network Tab - Sony IPELA SNC-CS10 User Manual

Reset Tab

Reset camera menu
Click Reset, and the message "Camera menu setting is
reset to default. Are you sure?" is displayed. To reset to
default, click OK.
Configuring the Network
— Network Menu
When you click Network on the Administrator menu,
the Network menu appears.
Use this menu to configure the network to connect the
camera and the computer.
The Network menu consists of 3 tabs: Network, PPPoE
and Dynamic IP address notification.

Network Tab

This section provides the menus for connecting the
camera through the network cable.
MAC address
Displays the MAC address of the camera.
Obtain an IP address automatically
(DHCP)
DHCP server is installed on the network. Select it when
the IP address is assigned by DHCP server. IP address is
assigned automatically.
Note
When you set Obtain an IP address automatically
(DHCP), make sure that DHCP server is working on the
internet.
Use the following IP address
Select this when a fixed IP address is set.
IP address
Type the IP address of the camera.
Subnet mask
Type the subnet mask.
Configuring the Network — Network Menu
37