Periodical Sending Tab - Setting The Periodical Ftp Client Activity - Sony IPELA SNC-CS10 User Manual

alphanumeric characters, - (hyphen) and _ (underscore)
for naming.
Suffix
Select a suffix to add to the file name.
Date & time: The date & time suffix is added to the
image file name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits) and second (2 digits), and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and an
consecutive 2 digits number is added to the image
file name.
Tip
A consecutive number added to Date & time and
Sequence number is used to identify each of multiple
files created with one alarm event.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the connected alarm.
Sensor input: The external sensor which is connected to
the sensor input of the camera I/O port.
Motion detection: Click Motion detection button, and
the Motion detection menu is displayed. You can set
the motion detection function (page 53).
Note
Motion detection works only when the Video mode is
set to MPEG4 and the Cropping is set to Off.
Effective period
Set the period when the alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period when the alarm
detection is effective in the schedule setting in the
other section.
Click Schedule and the menu for the Effective
period is displayed. ("Setting the Schedule —
Schedule Menu" on page 55)
Alarm buffer
Select Use alarm buffer when you forward the image of
before and after the alarm detection (pre-alarm, post-
alarm).
If you do not select it, only the image of the moment of
the alarm detection is forwarded.
Click Alarm buffer to display the Alarm buffer menu.
For details, see "Setting the Alarm Buffer — Alarm
buffer Menu" on page 55.
OK/Cancel
See "Buttons common to every menu" on page 28.
Periodical sending Tab — Setting
the Periodical FTP Client Activity
You can set to send an image file to FTP server
periodically.
Periodical sending
Select On when you want to use periodical sending. If
you select Off, Periodical sending is not executed.
Remote path
Type the remote path up to 64 characters.
Image file name
Type the file name of the image sent to FTP server up to
10 alphanumeric characters, - (hyphen) and _ (under
score).
Note
You cannot send the audio file by using the periodical
sending function of FTP. (for SNC-CS11)
Sending Images to FTP Server — FTP client Menu
47