Sony SuperExwave IPELA SNC-CS50N Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Security Camera
  5. Ipela SNC-CS50N
  6. Service manual

Sony SuperExwave IPELA SNC-CS50N Service Manual

Hide thumbs Also See for SuperExwave IPELA SNC-CS50N:
Table of Contents

Advertisement

Quick Links

Download this manual
NETWORK CAMERA
SNC-CS50N
SNC-CS50P
SERVICE MANUAL
1st Edition

Advertisement

Table of Contents
loading

Related Manuals for Sony SuperExwave IPELA SNC-CS50N

Summary of Contents for Sony SuperExwave IPELA SNC-CS50N

  • Page 1 NETWORK CAMERA SNC-CS50N SNC-CS50P SERVICE MANUAL 1st Edition...
  • Page 2 ! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
  • Page 3 For the customers in the Netherlands Voor de klanten in Nederland Hoe u de batterijen moet verwijderen, leest u in de tekst van deze handleiding. Gooi de batterij niet weg maar lever deze in als klein chemisch afval (KCA). Für Kunden in Deutschland Entsorgungshinweis: Bitte werfen Sie nur entladene Batterien in die Sammelboxen beim Handel oder den Kommunen.

  • Page 5: Table Of Contents

    Table of Contents Manual Structure 2-3. Confirmation after Adjustment ........ 2-9 (E) 2-3-1. Preparation for Confirmation ......2-9 (E) Purpose of this manual ............3 (E) 2-3-2. Confirmation of SYNC Level Adjustment ..2-9 (E) 2-3-3. Confirmation of Burst Level Adjustment ..2-9 (E) Related manuals ..............
  • Page 6 6. Block Diagram Overall ................6-1 7. Schematic Diagrams BI-193 ................7-1 CT-240 ................7-1 PR-291 ................7-3 SY-337 ................7-4 Frame Wiring ..............7-15 8. Board Layouts BI-193 ................8-1 CT-240 ................8-1 PR-291 ................8-2 SY-337 ................8-3 2 (E) SNC-CS50N/CS50P...

  • Page 7: Manual Structure

    Manual Structure Purpose of this manual This manual is the Service Manual of the Network Camera SNC-CS50N/CS50P. This manual contains the service overview, adjustments, circuit description, semiconductor pin assignments, spare parts, block diagram, schematic diagrams, and board layouts. Related manuals In addition to this Service Manual, the following manuals are provided.

  • Page 9: Service Overview

    Section 1 Service Overview 1-1. Board Location 1-3. Removing/Installing the Cabinet CT-240 board Tighten the following screw to the tightening torque as SY-337 board shown below. Tightening torque: Switching BSW M2 x 5: 0.2 ±0.02 N.m regulator 1-3-1. Lower Cover Removal 1.

  • Page 10: Upper Cover

    1-3-2. Upper Cover 1-3-3. Front Assembly Removal Removal 1. Remove the lower cover. (Refer to Section 1-3-1.) 1. Remove the lower cover. (Refer to Section 1-3-1.) 2. Remove the hook, then remove the cable cover in the 2. Remove the upper cover. (Refer to Section 1-3-2.) direction shown by the arrow.

  • Page 11: Rear Assembly

    1-4. Removing/Installing the Board 1-3-4. Rear Assembly Removal Tighten the following screws to each tightening torque as 1. Remove the lower cover. (Refer to Section 1-3-1.) shown below. 2. Remove the upper cover. (Refer to Section 1-3-2.) Tightening torque: BSW M2 x 5: 0.2 ±0.02 N.m 3.

  • Page 12: Switching Regulator

    1-4-2. Switching Regulator 1-4-3. PR-291 Board Removal Removal 1. Remove the cabinet. (Refer to Section 1-3.) 1. Remove the cabinet. (Refer to Section 1-3.) 2. Remove the five screws, then remove the switching 2. Remove the switching regulator. regulator. (Refer to Section 1-4-2.) 3.

  • Page 13: Board

    1-4-4. SY-337 Board 6. Remove the four screws, then remove the PC card connector from the connector (CN551) on the SY-337 board. Removal 7. Remove the thirty-eight solders, then remove the 1. Remove the cabinet. (Refer to Section 1-3.) modular jack, keyboard switch and terminal block. 2.

  • Page 14: Removing/Installing The Ccd Assembly And Optical Filter

    1-5. Removing/Installing the CCD 1-6. Description of Internal Switch Assembly and Optical Filter The main functions of the internal switch of this unit are as follows. When removing the screw of the retaining plate, be careful S601 (reset switch): SY-337 board (side B) of the spring between the front chassis and the CCD assembly because it may pop out.

  • Page 15: Matching Connector/Cable

    1-8. Matching Connector/Cable Use the connectors and cables below or the equivalent when connecting a cable to the connector on the rear panel during maintenance service. Connector function name Matching connector/cable Sony part No. BNC 75 Z (*1) VIDEO OUT 1-569-370-12 LENS...

  • Page 17: Alignment

    Section 2 Alignment . Be sure to perform adjustment, confirmation, and defect correction referring to this section when the board of this unit is repaired and replaced. . Take proper measures referring to Section 2-6 when an error message is displayed during adjustment and defect correction.

  • Page 18: Starting An Adjustment Program

    2-1-2. Starting an Adjustment Program (3) Select language at the bottom of a welcome page. (English) (4) Click [Setting] on the welcome page. 1. Confirmation of COM port The dialog box for authentication is displayed. The serial port of PC that can be used in an adjustment (5) Enter the user name and password of an administrator.
  • Page 19 5. Setting of select window 6. Display of adjustment mode window Press the [Adjust] button on the select window and display (1) Double-click the shortcut of “E400_Adj_Ver1.0.exe” and display the select window. the adjustment mode window. . For an adjustment item, press the [Tab] key and select the adjustment item (put it into the active state).

  • Page 20: Connection Diagram

    2-1-3. Connection Diagram Pattern box (PTB-700/500) SEE INSTRUCTION MANUAL VIDEO Camera Power supply DC 12 V Power supply CLASS 2 WIRING 24 VAC 5 VDC 12 VDC NETWORK POWER DC 12V – AC 24V RJ45 9 wires CN657 on UTP cable PR-291 board (CAT5) Waveform...

  • Page 21: Adjustment

    2-2. Adjustment 4. Switch S651 on the PR-291 board to the rear position of this unit. Perform the adjustment in Sections 2-2-1 to 2-2-8 continuously. S651 2-2-1. Read of Data in EEPROM 1. Display the adjustment mode window referring to Section 2-1-2.

  • Page 22: Sync Level Adjustment

    2-2-2. SYNC Level Adjustment 2-2-4. 0 dB Adjustment 1. Close the lens iris. 1. Shoot a 100% white pattern using this unit. 2. Press the [Tab] key and activate “Sync Level” on the 2. Connect the probe of an oscilloscope to TP1 on the adjustment mode window.

  • Page 23: Wb Adjustment (Preset At 3200 K)

    2-2-5. WB Adjustment (Preset at 3200 K) 2-2-6. Color Reproduction Adjustment 1. Set the lens iris so that white level E of VIDEO OUT 1. Shoot a color-bar cart using this unit. satisfies the specifications. 2. Set the lens iris so that white level F of VIDEO Object: 100% white pattern OUT satisfies the specifications.

  • Page 24: Read Of Detection Data At 3200 K

    4. Click the [Yes] button and save the read detection 2-2-7. Read of Detection Data at 3200 K data in EEPROM. 1. Press the [Tab] key and display the message box 5. Click the [OK] button when the message box below is below.

  • Page 25: Confirmation After Adjustment

    3. Click the [OK] button. 2-3. Confirmation after Adjustment 2-3-1. Preparation for Confirmation Perform steps (1) to (4) below when there is a camera that requires adjustment even after that. (1) Switch S651 on the PR-291 board to the rear Perform the operation below when confirming after position of this unit.

  • Page 26: Confirmation Of 0 Db Adjustment

    2-3-4. Confirmation of 0 dB Adjustment 2-3-5. Confirmation of Color Reproduction Adjustment 1. Shoot a 100% white pattern using this unit. 2. Connect the probe of an oscilloscope to TP1 on the 1. Shoot a color-bar chart using this unit. adjustment tool board.

  • Page 27: Check Of Sy-337 Board

    2-4. Check of SY-337 Board 2-4-3. Sensor 2 Check 2-4-1. Preparation 1. Change the connection on the IF tool board side from pin 1 to pin 3 during connection between the IF tool 1. Start the check software for an SY board. board and IF-954 board.

  • Page 28: Audio In/Out Check

    2-4-7. Audio IN/OUT Check 2-4-12. ATW Check 1. Click the [Check] button for audio (IN/OUT) check. 1. Click the [Check] button for ATW check. 2. Confirm that the output value below is satisfied. 2. Put a C14 filter in a lens. Confirming equipment: Level meter 3.

  • Page 29: Atw-Pro Check

    2-5. Defect Correction 5. Confirm that the white luminescent spot on a vectorscope is converged in the specifications. Object: 100% white pattern 1. Start of defect correction mode Confirming equipment: Vectorscope Confirmation point: White luminescent spot of (1) Set the switch (S651) on the PR-291 board to the front VIDEO OUT position of this unit.
  • Page 30 (4) Confirm the two items below and click the [Yes] 3. Defect detection and correction button if there is no problem. (1) Click the [Start] button on the defect correction mode . The defect to be corrected disappears on a color window.
  • Page 31 (2) The message box below is displayed when saving in EEPROM is completed. Click the [OK] button. When incorrect defect information was saved in EEPROM, perform steps (a) and (b) below to return to the factory-setting state (in which no defect information is contained) and then return to step 2 (the setting of a defect threshold value).

  • Page 32: Defect Correction

    2-6. Error Message List during Adjustment and Defect Correction . Switch the switch (S651) on the PR-291 board to the front position of this unit before performing camera adjustment. . After adjustment is completed, switch the switch (S651) on the PR-291 board to the rear position of this unit.

  • Page 33: Circuit Description

    Section 3 Circuit Description 3-3. SY-337 Board This unit consists of a CCD block (BI-193 board), camera signal processing block (PR-291 board), codec block (SY- 337 board), power block (PSA-016 board), and power The SY-337 board mounts 32-bit ARM9 MPU (IC202: terminal board (CT-240 board).

  • Page 34: Power Board

    3-5. PSA-016 Power Board Features . PoE is the IEEE802.3af. Authentication IC (IC101) that conforms to the IEEE802.3af standard is mounted. Resonance circuit . Since electric power is about 9 W for 12.95 W of PoE, a (AC block) Secondary circuit high-efficiency circuit configuration is required.
  • Page 35 In addition, for semiconductors with ID Nos., refer to the separate CD-ROM titled “Semiconductor Pin Assignments” (Sony Part No. 9-968-546-xx) that allows searching for parts by semiconductor type or ID No. The semiconductors in the manual or on the CD-ROM are listed by equivalent types.

  • Page 37: Spare Parts

    Therefore, specified parts should be used in the case of replacement. 2. Standardization of Parts Some repair parts supplied by Sony differ from those used for the unit. These are because of parts common- ality and improvement. Parts list has the present standardized repair parts.

  • Page 38: Exploded Views

    Cover and Front Block 5-2. Exploded Views PS2.6 x 6 B2 x 5 Part No. SP Description A-1158-625-A s ASSY, CCD (N) (FOR SNC-CS50N) A-1158-632-A s ASSY, CCD (P) (FOR SNC-CS50P) 1-788-239-11 s OPTICAL LOW PASS FILTER 1-788-328-12 s IR CUT FILTER CHANGE UNIT 1-788-343-11 s LENS, VARIFOCAL (IR) 1-831-588-11 s CABLE, FLEXIBLE FLAT (13 CORE) 3-183-833-11 s ADAPTOR...
  • Page 39 Chassis Block BVTT 3 x 6 2.6 x 6 PS2 x 10 Part No. SP Description A-1156-094-A s MOUNTED CIRCUIT BOARD, SY-337 A-1156-095-A s MOUNTED CIRCUIT BOARD, CT-240 A-1156-114-A s MOUNTED CIRCUIT BOARD, PR-291N (FOR SNC-CS50N) A-1156-115-A s MOUNTED CIRCUIT BOARD, PR-291P (FOR SNC-CS50P) 1-479-610-11 s REGULATOR, SWITCHING 1-554-088-00 s SWITCH,KEY BOARD...

  • Page 40: Electrical Parts List

    5-3. Electrical Parts List ------------ ------------ BI-193 BOARD PR-291 BOARD ------------ ------------ Ref. No. or Q'ty Part No. SP Description *N:[SNC-CS50N(J)/CS50N(UC)] *P:[SNC-CS50P(CE)] C902 1-107-826-11 s CAPACITOR,CHIP CERAMIC 0.1MF C903 1-107-826-11 s CAPACITOR,CHIP CERAMIC 0.1MF Ref. No. C906 1-107-826-11 s CAPACITOR,CHIP CERAMIC 0.1MF or Q'ty Part No.
  • Page 41 (PR-291 BOARD) (PR-291 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description C709 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V C772 *N 1-164-848-11 s CAPACITOR,CHIP CERAMIC 8PF/50V C710 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V *P 1-164-849-11 s CAPACITOR,CHIP CERAMIC 9PF/50V C711 1-164-943-11 s CAPACITOR,CHIP CERAMIC 0.01MF C773...
  • Page 42 (PR-291 BOARD) (PR-291 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description C828 1-127-692-91 s CAP, CHIP CERAMIC 10MF B 3216 FB661 1-469-637-11 s FERRITE, EMI (SMD) C829 1-112-820-11 s CAPACITOR, CHIP ELECT 39MF FB662 1-469-637-11 s FERRITE, EMI (SMD) C830...
  • Page 43 (PR-291 BOARD) (PR-291 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description Q653 8-729-230-60 s TRANSISTOR 2SA1586-YG R706 1-218-961-11 s RESISTOR, CHIP 4.7K 1/16W Q654 8-729-230-60 s TRANSISTOR 2SA1586-YG R708 1-218-953-11 s RESISTOR, CHIP 1K 1/16W Q655 8-729-230-60 s TRANSISTOR 2SA1586-YG R709...
  • Page 44 (PR-291 BOARD) (PR-291 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R773 1-218-957-11 s RESISTOR,CHIP 2.2K 1/16W(1005) R835 1-218-937-11 s RESISTOR, CHIP 47 R774 1-218-957-11 s RESISTOR,CHIP 2.2K 1/16W(1005) R836 1-218-937-11 s RESISTOR, CHIP 47 R777 1-218-953-11 s RESISTOR, CHIP 1K 1/16W R837...
  • Page 45 ------------ SY-337 BOARD (SY-337 BOARD) ------------ Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description A-1156-094-A s MOUNTED CIRCUIT BOARD, SY-337 C161 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V C162 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V C163 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V...
  • Page 46 (SY-337 BOARD) (SY-337 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description C357 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V C458 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V C358 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V C459 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V C359 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V C460...
  • Page 47 (SY-337 BOARD) (SY-337 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description C1005 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V 1-414-229-11 s INDUCTOR, FERRITE BEAD C1006 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V 1-414-229-11 s INDUCTOR, FERRITE BEAD C1007 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V FB201...
  • Page 48 (SY-337 BOARD) (SY-337 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description Q606 8-729-928-19 s TRANSISTOR 2SA1774R 1-218-953-11 s RESISTOR, CHIP 1K 1/16W Q607 8-729-928-19 s TRANSISTOR 2SA1774R 1-218-953-11 s RESISTOR, CHIP 1K 1/16W 1-218-935-11 s RESISTOR,CHIP 33 1/16W (1005) 1-218-965-11 s RESISTOR, CHIP 10K 1/16W 1-218-935-11 s RESISTOR,CHIP 33 1/16W (1005)
  • Page 49 (SY-337 BOARD) (SY-337 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R257 1-208-643-11 s RESISTOR CHIP 22 1/16W (1005) R322 1-218-965-11 s RESISTOR, CHIP 10K 1/16W R258 1-218-965-11 s RESISTOR, CHIP 10K 1/16W R323 1-218-965-11 s RESISTOR, CHIP 10K 1/16W R259...
  • Page 50 (SY-337 BOARD) (SY-337 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R455 1-218-953-11 s RESISTOR, CHIP 1K 1/16W R530 1-218-965-11 s RESISTOR, CHIP 10K 1/16W R456 1-208-643-11 s RESISTOR CHIP 22 1/16W (1005) R531 1-218-965-11 s RESISTOR, CHIP 10K 1/16W R457...
  • Page 51 (SY-337 BOARD) (SY-337 BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R1036 1-218-935-11 s RESISTOR,CHIP 33 1/16W (1005) S351 1-771-795-11 s SWITCH, SLIDE R1037 1-218-935-11 s RESISTOR,CHIP 33 1/16W (1005) S601 1-692-270-41 s SWITCH, SLIDE R1038 1-218-935-11 s RESISTOR,CHIP 33 1/16W (1005)

  • Page 52: Supplied Accessories

    5-4. Supplied Accessories -------------------- SUPPLIED ACCESSORIES -------------------- *N:[SNC-CS50N(J)/CS50N(UC)] *P:[SNC-CS50P(CE)] Ref. No. or Q'ty Part No. SP Description 3-863-696-01 s +BSW M2 (FOR FRONT COVER ATTACHING) *N 3-990-783-01 s INSTALLATION MANUAL (JAPANESE) 3-990-783-11 s INSTALLATION MANUAL (ENGLISH,FRENCH) 3-990-783-21 s INSTALLATION MANUAL (SPANISH,SIMPLIFIED CHINESE) *P 3-990-783-31 s INSTALLATION MANUAL (GERMAN,ITALIAN)
  • Page 53 Overall Overall Section 6 Block Diagram CAMERA SIGNAL PROCESS IR CUT FILTER BI-193 PR-291 CT-240 IC661 IC663 IC664 X654 CHANGE UNIT 2 INPUT NTSC: 28.63636 MHz EEPROM INVERTER NAND GATE PAL: 28.375 MHz IC991 CN901 CN655 IC653 IC656 CN656 CN951 Q654-659 IC665 CN953...
  • Page 55 BI-193, CT-240 Section 7 Schematic Diagrams Index L902 22uH Board name Page C905 C903 C907 10uF 0.1uF 0.1uF IC901 BI-193 ICX658AKA-1 Q901 VOUT CN901 CT-240 2SK1875-(TE85L) PR-291 SY-337 VSUB Frame Wiring 7-15 CCD_OUT L901 +15V 22uH GND2 GND1 C904 C902 C906 10uF C901...
  • Page 57 PR-291 PR-291 CN651 FL652 FB653 R666 0 R669 1k C675 A_OUT 0.1uF FL655 0.01uF R671 +3.3V C664 L654 GND2 GND1 SNC-CS50N SNC-CS50P SNC-CS50N SNC-CS50P D652 10uH C772 R747 100k TC7SH00FU(T5RSOYJF) C690 TC7SHU04FU(T5RSOJF) TC7SH00FU(T5RSOYJF) 1/16W C684 47uF 47uF RD6.2MW-T1B R734 CL658 C787 R748 100k...
  • Page 58 SY-337 (1/10) SY-337 (1/10) +3.3V-1 +3.3V-1 E1 E1 C2 C2 C3 C3 C4 C4 C5 C5 C8 C8 C9 C9 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF...
  • Page 59 SY-337 (1/10) SY-337 (1/10) 10uF 0.1uF VSS90[N6] DVDD53[M6] VSS89[L6] VSS88[K6] DVDD52[J6] VSS87[H6] CVDD2[G6] CVDD1[F6] VSS86[E6] DVDD51[E7] DVDD50[E8] VSS85[E9] DVDD49[E10] VP2D_14[E11] VP2D_18[E12] VP2D_19[E13] RSV05(NC)[E14] DSP_TMS TMS[E15] VSS84[E16] DVDD48[E17] VSS83[E18] DVDD47[E19] DVDD46[E20] VSS82[E21] DVDD45[E22] VSS81[F22] DVDD44[G22] DVDD43[H22] VSS80[J22] DVDD42[K22] AARDY[L22] APDT[M22] AHOLDA[N22] ABUSREQ[P22] ASOE3[R22] ABE7...
  • Page 60 SY-337 (2/10) SY-337 (2/10) +3.3V-1 C160 C174 +3.3V-1 0.1uF 0.1uF C170 C155 0.1uF 0.1uF C180 22uF C156 DGND DGND 22uF AED26 AED25 AED58 AED57 DQ26[A1] DQ25[C3] DQ26[A1] DQ25[C3] AED28 AED60 DQ28[B1] VSSQ10[B3] DQ28[B1] VSSQ10[B3] VSSQ1[C1] VSSQ1[C1] VSSQ2[D1] VSSQ2[D1] C151 C163 C166 C177 VDDQ1[E1]...
  • Page 61 SY-337 (3/10) SY-337 (3/10) C231 IC203 0.1uF R309 TC7SH08FU(T5RSOYJF) R246 ARM_EB3 R243 R254 +3.3V-1 ARM_EB2 004,008 ARM_PERI 008,009 DOC_BUSY ARM_EB1 IC206 ARM_EB0 TC7SZ08AFE S203 ARM_OE R267 FACTORY RESET HWVR[2:0]=000 G2 DOC64MB 001 G3 DOC64MB ARM_RW 111 G2 DOC32MB ARM_CS5 C232 ARM_CS4 R339 R340...
  • Page 62 SY-337 (4/10) SY-337 (4/10) DOC 64MB 001,005,006,008,010 ARM_D BUF_CTL 003,004,010 ARM_CTL 003,004,005,006,010 ARM_A 003,004,010 003,008 RESET +3.3V-1 003,004 ARM_SDRAM_CTL C351 MX1 SDRAM 0.1uF C353 0.1uF JC351 ARM_CTL +3.3V-1 001,005,006,008,010 003,004,005,006,010 DGND DGND C352 0.1uF +3.3V-1 +3.3V-1 BUF_D IC355 IC353 C355 C363 C359 C367...
  • Page 63 SY-337 (5/10) SY-337 (5/10) +3.3V-1 L402 R409 R411 R413 49.9 49.9 T401 CN401 TXD+ TXD- VDD_CORE_1.8V RXD+ C425 C427 C423 10uF Spare 0.01uF 0.01uF Spare C421 RXD- 0.0068uF DGND Spare VDD_PLL_1.8V R412 Spare 49.9 C424 C426 R414 10uF 0.01uF R410 49.9 C422 DGND...
  • Page 64 SY-337 (6/10) SY-337 (6/10) Pull Up +3.3V-1 +3.3V-1 CL455 R471 CFC_INTR C455 C459 C462 C466 C468 C470 C472 C474 C476 R472 CFC_RESET C453 C457 C464 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF R473 CFC_READY ARM_PERI_PULL_UP L452 R474 +1.5V-1...
  • Page 65 SY-337 (7/10) SY-337 (7/10) CardBus CTL 003,005,006 ARM_RESET_OUT CAD_VCC CardBus POWER IC501 +3.3V-1 TPS2211IDBR C506 C508 C510 CL507 0.1uF 0.1uF 0.1uF +3.3V-CAD AVCC1 AVCC2 +3.3V-VPP 5V-1 AVCC3 R505 +3.3V-1 5V-2 AVPP 3.3V-1 VCCD1 3.3V-2 VCCD1 VCCD0 VCCD0 C501 C503 C502 VPPD1 C504 VPPD1...
  • Page 66 SY-337 (8/10) SY-337 (8/10) TO PR CN553 VDEC_YOUT WIRELESS LAN VDEC_YOUT7 VDEC_YOUT7 CAD_D VDEC_YOUT6 VDEC_YOUT6 CN551 VDEC_YOUT5 VDEC_YOUT5 CAD_A VDEC_YOUT4 VDEC_YOUT4 CAD_CTL CAD_D3 VDEC_YOUT3 CAD0//D3 VDEC_YOUT3 CCD1//CD1 VDEC_YOUT2 VDEC_YOUT2 CAD_D4 VDEC_YOUT1 CAD1//D4 VDEC_YOUT1 CAD_D11 VDEC_YOUT0 CAD2//D11 VDEC_YOUT0 CAD_D5 CAD3//D5 CAD_D12 CAD4//D12 VDEC_PCLK VDEC_PCLK...
  • Page 67 SY-337 (9/10) SY-337 (9/10) +3.3V-1 +3.3V-1 DGND R601 R602 D614 RB601 003,008,009 ARM_PERI 6.8k 6.8k 4.7k UDZSTE-1730B ALARM_IN0 D618 UDZSTE-1730B D608 UDZSTE-1730B D612 PH601 D603 UDZSTE-1730B D619 TLP181(BL-TPR) MA111-TX D609 UDZSTE-1730B UDZSTE-1730B FB608 D615 UDZSTE-1730B D613 DGND UDZSTE-1730B ALARM_IN1 TO PS- TO PS-713 PH602 D604...
  • Page 68 SY-337 (10/10) SY-337 (10/10) +3.3V-1 IC1001 IC1003 C1009 C1003 C1005 C1011 C1013 C1015 C1001 C1007 SN74LVC16245AZQLR SN74LVC16245AZQLR 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF BUF_D 003,004 ARM_D 001,004,005,006,008 ARM_CTL BUF_CTL R1035 33 ARM_D31 R1001 33 BUF_D31 ARM_EB3 BUF_EB3 003,004,005,006 001,004,005,006,008 R1036 33 BUF_EB2...
  • Page 69 Frame Wiring Frame Wiring BI-193 CN901 CN655 CN657 (FOR TOOL) CN659 CN553 CN551 VDEC_YOUT7 VDEC_YOUT7 CCDLEVEL VDEC_YOUT6 VDEC_YOUT6 A/D_IN TRST VDEC_YOUT5 VDEC_YOUT5 CAD0//D3 VSUB VSUB VDEC_YOUT4 VDEC_YOUT4 CCD1//CD1 SIFSEL CAD1//D4 CCD-OUT CCD-OUT VDEC_YOUT3 VDEC_YOUT3 CAD2//D11 VDEC_YOUT2 VDEC_YOUT2 +3.3V CAD3//D5 +15V +15V VDEC_YOUT1 VDEC_YOUT1...
  • Page 71 BI-193, CT-240 Section 8 Board Layouts Index Board name Page BI-193 CT-240 PR-291 SY-337 BI-193 BI-193 -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 CT-240 CT-240 -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 SNC-CS50N/CS50P...
  • Page 72 PR-291 PR-291 PR-291 PR-291 -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 SNC-CS50N/CS50P...
  • Page 73 SY-337 SY-337 SY-337 SY-337 -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 SNC-CS50N/CS50P...
  • Page 75 VECTORSCOPE SCALE Copy this vectorscope scale on a transparent sheet for use. J-6433-540-A SNC-CS50N/CS50P...
  • Page 76 SNC-CS50N (UCJ) Printed in Japan Sony Corporation SNC-CS50P (CE) J, E 2006. 1 22 9-968-219-01 ©2006...

This manual is also suitable for:

Superexwave ipela snc-cs50p

Table of Contents