7.
Sending RS232 Commands Via Ethernet
The LAN connector accepts the same serial command set as RS232. It is convenient for IP
control applications and can be tested with a TCP terminal program such as Tera Term or a
UDP terminal program such as Hercules.
The following connections can be used for IP control:
•
TCP and UDP port 57
Notice the following in the TCP example below using Tera Term:
•
The IP address is 10.15.0.75
•
Port 57 is selected
•
Service is set to "Other" to indicate that TCP is being used without Telnet or SSH
Planar UltraRes L Series RS232 User Manual
020-1428-00A
57
Page | 57