Planar UltraRes L Series User Manual page 34

Setting Command Code
Save SAVE. 2314 !
Diagnostics DIAGNOSTICS
Schedule SCHEDULE 2100 =?
Schedule SCHEDULE. 2102 =?
Action ACTION
Schedule SCHEDULE.DAY 2101 =?
Day
Schedule SCHEDULE. 2104 ?
Description DESCRIPTION
Planar UltraRes L Series RS232 User Manual
020-1428-00A
34
Modifiers
Location
0 = USB
Mod 1: Slot Unsigned int
1-20
Mod 2: Parameter
0 = FREQ
1 = MINUTE
2 = HOUR
3 = DAY
4 = ACTION
5 = DATA
6 = ENABLE
[None = ALL]
Slot 0 = TURN.ON
1-20 1 = TURN.OFF
2 = RECALL
3 = PANEL.
BRIGHTNESS
Slot 0 = MON
1-20 1 = TUE
2 = WED
3 = THU
4 = FRI
5 = SAT
6 = SUN
Slot String
1-20
Example
No SAVE.DIAGNOSTICS(USB)
SAVE.DIAGNOSTICS(USB)@ACK
Yes [Change the action for event 3 to
Turn On]
SCHEDULE(3, ACTION)=0
SCHEDULE(3, ACTION):0
Yes [Change the action for event 3 to
Turn On]
SCHEDULE.ACTION(3)=TURN.ON
SCHEDULE.ACTION(3):TURN.ON
Yes [Change the day for event 3 to
Monday]
SCHEDULE.DAY(3)=MON
SCHEDULE.DAY(3):MON
Yes [Read the schedule description
string for event 3]
SCHEDULE.DESCRIPTION(3)?
SCHEDULE.DESCRIPTION(3):
"Daily 08:15 Backlight 25"
Notes
See Main -> Advanced
Settings -> System
Settings -> Save
Diagnostics to USB.
See Main -> Advanced
Settings -> Schedule ->
Set Event 1-20.
Reference the Schedule
Action, Schedule Day and
Schedule Frequency
settings for operand
values.
See Main -> Advanced
Settings -> Schedule ->
Set Event 1-20 -> Action.
See Main -> Advanced
Settings -> Schedule ->
Set Event 1-20 -> Day.
This is the string used for
the schedule slots in the
Main -> Advanced
Settings -> Schedule
menu.
Page | 34