Planar UltraRes L Series User Manual page 29

Setting Command Code
Offset OFFSET 210
OSD Close OSD.CLOSE 1310 !
OSD ORIENTATION 1302 =?+-
Rotation
OSD OSD.STATUS 1308 ?
Status
Planar UltraRes L Series RS232 User Manual
020-1428-00A
29
Modifiers
=?+- Mod 1: Zone For RED, GREEN and
0 = ZONE.1 BLUE modifiers, one
1 = ZONE.2 operand:
2 = ZONE.3 0-100
3 = ZONE.4
253 = ALL.INPUT For ALL operand,
254 = ALL three operands:
254 = ALL.ZONE Red Offset: 0-100
255 = CURRENT Green Offset: 0-100
[None = CURRENT] Blue Offset: 0-100
Mod 2: Color
0 = RED
1 = GREEN
2 = BLUE
255 = ALL
[None = ALL]
0 = LANDSCAPE
1 = PORTRAIT
0 = DISABLE
1 = ENABLE
Example
No [For red offset on Zone 1]
OFFSET(ZONE.1, RED)=50
OFFSET(ZONE.1 RED):50
[For all three offsets on the current
zone: Red Gain = 51, Green Gain
= 52, Blue Gain = 53]
OFFSET=51 52 53
OFFSET=51 52 53
No OSD.CLOSE
OSD.CLOSE@ACK
No ORIENTATION=LANDSCAPE
ORIENTATION:LANDSCAPE
No OSD.STATUS?
OSD.STATUS=ENABLE
Notes
See Main -> Image Adjust
-> Red/Green/Blue
Offset.
ALL modifier adjusts all
three offsets at the same
time.
The first modifier can only
be missing if both
modifiers are missing.
Forces any menus or
message boxes that are
currently on screen to
close.
See Main -> Advanced
Settings -> Menus and
Messages -> OSD
Rotation.
Indicates whether the
OSD (menu, message
box or confirmation
dialog) is currently being
shown on the display.
Page | 29