Planar UltraRes L Series User Manual page 52

Manually installing the USB drivers
If the automatic USB driver installation doesn't succeed, you can follow the steps below to
manually install the USB drivers, which can be downloaded from www.planar.com/support.
1. Plug in the USB cable to your computer and to the Planar UltraRes L Series panel.
2. Windows will detect the new hardware and attempt to install the drivers on its own. If you
do not see the "Installing device driver software" message, then the driver installation
previously failed. Skip to step 5.
3. If driver installation succeeds, you will see a message like the one shown below. If so,
driver installation is complete.
4. If Windows' attempt at installing the drivers fails, you will need to manually install the
drivers using the steps below.
Planar UltraRes L Series RS232 User Manual
020-1428-00A
52
Page | 52