Horizontal Spool Pin
Placing the Foam Pad, the Thread Spool and the Spool Cap
Spool caps hold the thread spool in place for proper release of thread from the spool. The spool cap is only
used with the horizontal spool holder.
> Place the foam pad on the spool pin.
> Place the thread spool on the spool pin.
> Position the appropriate spool cap on the spool pin so that there is no space between the spool cap and
the thread spool.
Using the Spool Net (Optional Accessories)
The spool net holds the thread on the thread spool and prevents the thread from knotting and breaking.
> Pull the spool net over the thread spool. Ensure when doing so that the spool net does not slip off the
thread spool, e.g. double-insert the net over the thread spools or insert a part of the net into the thread
spool at the rear.
2.5 Feed Dog
Adjusting the Feed Dog
> To lower the feed dog, push the button «Feed Dog Up/Down».
> To raise the feed dog, push the button «Feed Dog Up/Down» again.
Adjusting the Feed Dog
> Tap «Feed Dog Indicator».
> Raise or lower the feed dog according to the animation.
2.6 Slide-on Table
Using the Slide-on Table
The Slide-on Freearm Extension Table, attached to the freearm, enables the available sewing area to be
extended.
Sewing Preparation
31