Sewing The Manual 5-Step Buttonhole With The Buttonhole Foot #3 - Bernina 435 User Manual

Buttonholes
> Tap «i-Dialog».
> Tap «Manual Length Adjustment».
man
> Sew the required length of the buttonhole.
> Stop when the required length of the buttonhole or the length marking is reached.
> Step 3 appears by tapping «Scroll Down».
> Stop the machine at the level of the first stitch where the buttonhole begins.
> Step 4 appears by tapping «Scroll Down».
> Step 5 appears by tapping «Scroll Down».
> Stop the machine at the level of the last stitch of the first bead.
> Step 6 appears by tapping «Scroll Down».
> Step 7 appears by tapping «Scroll Down».
9.10 Sewing the Manual 5-step Buttonhole with the Buttonhole Foot #3
The length of the buttonhole is determined manually when sewing. The bartack, eye and securing stitches
are preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by
pressing the button «Quick Reverse».
Prerequisite:
•
> Tap «Buttonholes».
> Select Round Buttonhole with Normal Bartack No. 54.
> Tap «i-Dialog».
> Tap «Manual Length Adjustment».
man
86
– Step 1 is activated in the display to start the buttonhole.
– Step 2 becomes active when sewing starts.
– The machine sews straight stitches in reverse.
– The machine sews the upper bartack and stops automatically.
– The machine sews the second bead.
– The machine sews the lower bartack and stops automatically.
– The machine secures and stops automatically.
The Buttonhole Foot #3 is fitted.
– Step 1 is activated in the display to start the buttonhole.