Changing The Presser Foot; Having The Presser Foot Displayed In The User Interface - Bernina 435 User Manual

Attaching the Presser Foot Sole
> Place the presser foot sole beneath the shaft so that the cross pin is beneath the opening of the shaft.
> Lower the shaft via the lever.
– The presser foot sole snaps in.

Changing the Presser Foot

> Raise the needle.
> Raise the presser foot.
> Switch the machine off.
> Push the clamping lever up (1).
> Remove the presser foot (2).
> Guide the new presser foot upwards over the cone.
> Press the clamping lever down.

Having the Presser Foot displayed in the User Interface

For each selected stitch, the machine displays the recommended and any other alternative presser feet.
Prerequisite:
• The machine is switched on.
> Select a stitch pattern.
– In the icon «Presser Foot Indicator/Presser Foot Selection» the recommended presser foot is indicated
with a number.
> Tap «Presser Foot Indicator/Presser Foot Selection».
> Wipe up in the area of the presser feet to have more preser feet displayed.
Sewing Preparation
33