Labels & Cosmetics - Grizzly G0555 Owner's Manual

MODEL G0555
ULTIMATE 14" BANDSAW
WARNING!
Specifications
Motor: 1 HP, 110V/220V, 1-Phase, 60 Hz To reduce risk of serious injury when using this machine:
Prewired Voltage: 110V 1. Read & understand owner's manual before operating.
Full Load Amps: 11A (110V); 5.5A (220V) 2. Never touch moving blade & keep hands out of blade path.
Table Size: 14" x 14" 3. Always wear approved eye protection and respirator.
Blade Speeds: 1690, 2950 FPM 4. Only remove jammed cutoff pieces when blade is stopped.
Blade Length Range: 92-1/2" – 93-1/2" 5. Use push stick or holding jig to cut small or narrow pieces.
Blade Width Range: 1/8" – 3/4" 6. Turn motor OFF and disconnect power before changing
Max. Cutting Width Left of Blade: 13-1/2" blades, making adjustments, or servicing.
Max. Cutting Height: 6" 7. Maintain adjustment of blade tension, tracking, & guides.
Table Tilt: 15˚L ⁄ 45˚R 8. Keep upper guide adjusted to just clear the workpiece.
Weight: 190 lbs. 9. Hold workpiece firmly against table to maintain control.
10. Only run saw with wheel covers closed & all guards in place.
252923
11. Never reach under table while blade is in motion.
Date 12. Secure/remove loose clothing and long hair.
13. DO NOT expose to rain or use in wet locations.
SN
14. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Grizzly in Taiwan
145V2
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
149
155
157
147
156
REF PART # DESCRIPTION
144V2 P0555144V2 MACHINE ID LABEL V2.05.11
145V2 P0555145 GLASSES/RESPIRATOR LABEL V2.07.13
146 P0555146 MODEL NUMBER LABEL
147 P0555147 DISCONNECT POWER LABEL
148 P0555148 BANDSAW DOOR LABEL
149 P0555149 ELECTRICITY LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-60-
Scan QR code to visit our Parts Store.
Labels & Cosmetics
144V2
G0555
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
146
158
WARNING!
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
148
REF PART # DESCRIPTION
155 P0555155 GRIZZLY NAMEPLATE
156 P0555156 TOUCH-UP PAINT GRIZZLY GREEN
157 P0555157 TOUCH-UP PAINT GRIZZLY PUTTY
158 P0555158 READ MANUAL LABEL
159 P0555159 BLADE TENSION NOTICE TAG
Model G0555 (Mfd. Since 5/11)
159
The blade was purposely left
untensioned for shipping
purposes. Make sure you
properly tension the blade
(see manual) before starting
this bandsaw!
149