Epson Stylus OFFICE B30 Service Manual page 94

EPSON Stylus C110/C120/D120/WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70
When installing the Ink System Unit, pay attention to the
following instructions.
• Align the dowels (x3) of the Ink System Unit with the
positioning holes (x3) of the Base Frame.
Base Frame Side
Ink System Side
Figure 4-77. Installing Ink Stem Unit (1)
• Align the ribs (x2) of the Ink System Unit with the grooves
(x2) of the Base Frame.
Ink System Unit
Figure 4-78. Installing Ink System Unit (2)
DISASSEMBLY/ASSEMBLY
2
3
1
2
3
1
Rib and Groove
Disassembling Printer Mechanism
Pass the Waste Ink Tube through the groove of the Base
Frame so that the red line of the Waste Ink Tube faces to the
Ink System Unit side.
Waste Ink Tube
Groove
Figure 4-79. Routing Waste Ink Tube
Referring to the figure below, attach the Tube Stopper to the
Waste Ink Tube, and insert them into the Waste Ink Cover.
30±1mm
Tube Stopper
Figure 4-80. Installing Waste Ink Tube
Revision C
Waste Ink Tube
94
Confidential