Hopper - Epson Stylus OFFICE B30 Service Manual

EPSON Stylus C110/C120/D120/WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70

4.5.4 Hopper

Part/Unit that should be removed before removing Hopper
Upper Housing/Lower Housing
Removal Procedure
1. Release the dowel A of the Hopper.
2. Release the dowel B of the Hopper, and remove the Hopper together with the
Compression Spring 1.94.
Dowel B
Compression Spring1.94
Figure 4-33. Removing Hopper
DISASSEMBLY/ASSEMBLY
Dowel A
Hopper
Disassembling Printer Mechanism
When installing the Hopper, be sure to engage the rib of the
Hopper with the guide groove of the Base Frame.
Figure 4-34. Installing Hopper
After removing/replacing the Hopper, be sure to perform the
A D J U S T M E N T
R E Q U I R E D
specified adjustment. See
Revision C
Hopper
Rib and Groove
Chapter 5 " ADJUSTMENT" (p.98)
Confidential
78