Table of Contents
Advertisement
Unlike the single-trip memory, the total-trip memory is not deleted after a period
of interruption of driving of 2 hours.
Notice
All information in the memory 1 and 2 is erased if the battery of the vehicle is dis-
connected.
Operation
First read and observe the introductory information and safety warn-
ings
on page 9.
The rocker switch
» fig. 3
and the button
B
wiper lever.
Select memory
›
Press the button
» fig.
3.
A
Selecting functions
›
Briefly press the rocker switch
B
functions of the multi-functional indicator one after the other.
Reseting
›
Select the desired memory.
›
Press the button
» fig. 3
for longer.
A
1)
On some models in certain countries, the display appears in kilometres/litre.
2)
On some models in certain countries, - -.- km/ltr. is displayed when the vehicle is stationary.
10
Using the system
Fig. 3
Multi-functional indicator: Con-
trol elements
are located on the windshield
A
» fig. 3
up or down. This opens the individual
The following readouts of the selected memory will be set to zero by button
›
Average fuel consumption
›
Distance driven
›
Average speed
›
Driving time
Multi-function display details
First read and observe the introductory information and safety warn-
ings
on page 9.
Outside temperature
The current outside temperature is shown in the display.
If the outside temperature drops below +4 °C, a snow flake symbol (warning sig-
nal for ice on the road) appears before the temperature indicator and an audible
signal will sound. After pressing the rocker switch
tion which was shown last is indicated.
Driving time
The driving time which has elapsed since the memory was last erased, appears in
the display. If you want to measure the driving time from a particular moment in
time on, at this moment, reset the memory to zero by pressing the button
» fig. 3
on page 10.
A
The maximum time indicated in both memories is 19 hours and 59 minutes and on
vehicles which are fitted with an information display, it is 99 hours and 59 mi-
nutes. The indicator is set back to zero if this period is exceeded.
Current fuel consumption
The current fuel consumption level is shown in the display in litres/100 km
can use this information to adapt your driving style to the desired fuel consump-
tion.
The display appears in litres/hour if the vehicle is stationary or driving at a low
speed
.
2)
Average fuel consumption
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km
» page
1)
» fig. 3
on page 10 the func-
B
9.
:
A
. You
1)
Advertisement
Chapters
Table of Contents
