Ssdp; Ssh - Pitney Bowes DP50P Operating Instructions Manual

4. Monitoring and Configuring the Printer
• When the printer power is cut during job spooling, this determines whether to reprint the
spooled job.
Protocol configuration
msh> spoolsw diprint {on | off}
msh> spoolsw lpr {on | off}
msh> spoolsw ipp {on | off}
msh> spoolsw smb {on | off}
msh> spoolsw ftp {on | off}
msh> spoolsw sftp {on|off}
• You can specify the settings for diprint, lpr, ipp, smb and sftp.

ssdp

Use the "ssdp" command to view and configure SSDP settings.
4
View settings
msh> ssdp
Setting effective time
msh> ssdp profile {1801-86400}
The default is 10800 seconds.
Advertise packet TTL settings
msh> ssdp ttl {1-255}
The default is 4.

ssh

Use the "ssh" command to view and configure SSH settings.
View settings
msh> ssh
Data compression communication settings
msh> ssh compression {on|off}
The default is "on".
SSH/SFTP communication port setting
msh> ssh port {22, 1024-65535}
The default is 22.
164