Table of Contents
Advertisement
4. Monitoring and Configuring the Printer
msh> set snmp {up | down}
msh> set ssl {up | down}
msh> set ssl6 {up | down}
• If Secured Sockets Layer (SSL, an encryption protocol) function is not available for
msh> set nrs {up | down}
msh> set rfu {up | down}
msh> set rfu6 {up | down}
msh> set ipp {up | down}
msh> set ipp6 {up | down}
msh> set http {up | down}
msh> set http6 {up | down}
msh> set bonjour {up | down}
msh> set bonjour6 {up | down}
msh> set ssh {up | down}
msh> set ssdp {up | down}
4
msh> set nbt {up | down}
msh> set sftp {up | down}
msh> set sftp6 {up | down}
show
Use the "show" command to display network interface board configuration settings.
View settings
msh> show
• If "-p" is added, you can view settings one by one.
• For details about the information displayed, see "Understanding the Displayed Information".
slp
Use "slp" command to view and configure SLP settings.
msh> slp ttl "ttl_val"
158
the printer, you cannot use the function by enabling it.
Advertisement
Table of Contents
