Position Of Upper Looper Clutch Exhange Body - Husqvarna VIKING HUSKYLOCK 936 Service Manual

6. POSITION OF UPPER LOOPER CLUTCH EXCHANGE BODY
Check
When the looper clutch is at the S-Position (on) position there should not be any distance
or play between exchange body (A) and looper link (B).
When the looper clutch is at the C-position (off) position the distance should be at
least 1mm between the exchange body (A) and looper link (B).
Adjustment
1.Put the looper clutch in the S-position.
2. Loosen the 2 screw's (C) and move the clutch assemblyuntil there is no play between
exchange body (A) and looper link (B) and tighten the screws (C).
C- Position S-Position
104 72 49-26 Husqvarna Viking Huskylock 936 11