Sony HDMI VPL-FH300L Operating Instructions Manual page 47

5
Insert the new lamp a all the way in
until it is securely in place. Tighten the
three screws b of Lamp 1 and Lamp
2.
Lamp 2
Lamp 1
6
Caution
Do not put your hands into the lamp
replacement slot, and do not allow any liquid or
other objects into the slot to avoid electrical
shock or fire.
Notes
• Be careful not to touch the glass surface
of the lamp.
• The power will not turn on if the lamp is
not secured properly.
Restore the lamp cover to the original
position and tighten the four screws with
the phillips screwdriver.
Note
Be sure to attach the lamp cover securely
as it was. If not, the projector cannot be
turned on.
Replacing the Lamp (s)
Lamp 2
Lamp 1
47