Sony HDMI VPL-FH300L Operating Instructions Manual page 39

Setting items Functions
Power Saving Selects the Power Saving mode.
Mode • Lamp Cutoff: The lamp goes off and the ON/
• Standby: The projector goes into Standby mode and
Off: The projector does not go into Power Saving
mode.
Input-C Signal Sel. Selects the type of signal input from the equipment
connected to the INPUT C connector.
Selects the type of signal input from the equipment by
selecting "Input-C" with the INPUT key.
• Auto: Selects the input signal type automatically.
• Computer: Inputs the signal from a computer.
• Video GBR: Inputs the signal from a TV game or
• Component: Inputs the component signal from a
Color System Selects the color system of the input signal.
• Auto: Selects the color system of the input signal
• "NTSC
Notes
• If you turn on "High Altitude Mode" to "On" at an altitude less than 1,500 m (4,921 feet), the
projector may reduce the reliability of the lamp.
• When "High Altitude Mode" is set to "On", the number of turns of the fan increases, and the
fan noise becomes slightly louder.
• When "Standby Mode" is set to "Low," the network presentation function and network control
function cannot be operated.
• When the input signal is not displayed correctly even if "Input-C Signal Sel." set to "Auto,"
select the item according to the input signal.
• Normally, set "Color System" to "Auto." If the picture is distorted or colorless, select the
color system appropriate for the input signal.
STANDBY indicator lights in orange if no signal is
input for 10 minutes. The lamp lights again when a
signal is input or any key is pressed.
the ON/STANDBY indicator lights in red if no signal
is input for 10 minutes. To use it, turn on the power
again.
HDTV broadcast.
DVD player/recorder, Blu-ray Disc player, digital
tuner, etc.
automatically from among NTSC
NTSC , PAL-M, PAL-N, or PAL60.
4.43
"–"PAL-N": Allows you to set the color
3.58
system to the selected system manually.
Initial setting
Off
Auto
Auto
, PAL, SECAM,
3.58
The Setup Menu
39