Sony HDMI VPL-FH300L Operating Instructions Manual page 22

To connect a computer (Analog)
Front (the connector panel on the right
of the lens)
INPUT A
INPUT B
OUTPUT
R/R-Y/P
R
to INPUT A
connector
HD D-sub 15-pin
cable (not supplied)
to monitor output
Notes
• The projector accepts VGA, SVGA, XGA,
WXGA, SXGA, SXGA+, WSXGA+ and
UXGA signals. However, we recommend
that you set the output mode of your
computer to WSXGA+ (VPL-FH300L) or
WXGA (VPL-FW300L) mode for the
external monitor.
• If you set your computer, such as a notebook
computer, to output the signal to both your
computer's display and the external monitor,
the picture of the external monitor may not
appear properly. Set your computer to output
the signal to only the external monitor.
For details, see the operating instructions
supplied with your computer.
22
Connecting the Projector
RGB
HDMI
INPUT D
RGB
MONITOR
G/Y B/B-Y/P HD VD
B
INPUT C
INPUT E
Computer
Note
To connect a Macintosh computer equipped
with a video output connector of a type having
two rows of pins, use a commercially available
plug adaptor.
To connect a computer (Digital) or
video equipment (Digital)
Front (the connector panel on the right
of the lens)
INPUT A RGB
INPUT B RGB
OUTPUT MONITOR
R/R-Y/P G/Y B/B-Y/P
R
to INPUT D
connector
to DVI-D output
connector
to HDMI connector
1 HDMI-DVI-D cable (not supplied)
2 HDMI cable (not supplied)
Notes
• The projector accepts VGA, SVGA, XGA,
WXGA, SXGA, SXGA+, WSXGA+,
UXGA, Full HD and 2K × 1K signals.
However, we recommend that you set the
output mode of your computer to WSXGA+
INPUT D HDMI
HD VD
B
INPUT C
INPUT E
Computer
DVD player