Sony HDMI VPL-FH300L Operating Instructions Manual page 26

3
Turn on the equipment connected to
the projector.
4
Press the INPUT key to select the
input source.
You can select directly the input signal
you want to project by pressing one key
from among INPUT A, B, C, D or E on
the Remote Commander.
Each time you press the INPUT key on
the control panel, the input signal
switches as follows:
Input-AtInput-BtInput-CtInput-DtInput-E
S-VideoTVideoTInput-FT
To input from
Computer, etc.
connected to the
INPUT A connector
Computer, etc.
connected to the
INPUT B connector
Computer/VCR, etc.
connected to INPUT C
connector
Computer/VCR, etc.
connected to INPUT D
(Digital) connector
Video equipment
connected to the
optional HDSDI board
Computer connected to
LAN to use the network
presentation function
Video equipment
connected to the VIDEO
input connector
Video equipment
connected to the
S VIDEO input
connector
Smart APA (Auto Pixel Alignment)
adjusts the picture of the connected
equipment so that it is projected clearly.
26
Projecting
5
Press INPUT
to display
Input-A
Input-B
Input-C
Input-D
Input-E
6
Input-F
Video
7
S-Video
Notes
• If "Auto Input Search" is set to "On," the
projector searches for the signals from
the connected equipment and displays
the input channel where the input signals
are found.
For details, see "Auto Input Search"
in the Function menu on page 40.
• The Smart APA feature is effective for
the input (analog) signal from a
computer only.
Switch the equipment connected to
output to the projector.
Depending on the type of your
computer, for example a notebook, or an
all-in-one LCD type, you may have to
switch the computer to output to the
projector by pressing certain keys (e.g.,
, etc.), or by changing
/ /
,
LCD
VGA
your computer's settings.
F7 Fx
or
and
Fn
Note
The key used for switching the computer to
output to the projector varies depending on
the type of computer.
Adjust the upper, lower, left or right
position of the picture using the M/m/
</, key while pressing the SHIFT
key.
Adjust the size of the picture and the
focus.
Press the FOCUS key and adjust the
focus using the M/m/</, keys.
Press the ZOOM key and adjust the size
of the picture using the M/m/</,
keys.