Table of Contents
Advertisement
Turning Off the Alarm
If you leave the alarm turned on, it will sound
every day at the preset alarm time.
To stop the alarm from sounding, perform the
steps below to turn it off.
To have the alarm sound again, turn it on.
●
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o'clock, and the function hand to move
to [DT].
Function hand
2.
Press (A).
This causes the function hand to move to
[ALM] and turns on the alarm.
3.
Press (B) to move the second hand to off.
Each press of (B) toggles between on
●
and off.
Second hand
Alarm off
Alarm on
4.
Push the crown back in.
Operation Guide 5639
Resetting Watch Settings
This section explains how to return the watch
settings below to their initial factory defaults.
Watch Settings
●
Stopwatch
●
Alarm
●
1.
Enter the Calendar Mode.
Navigating Between Modes
l
2.
Pull out the crown to the second click.
This causes the second hand to move to
12 o'clock.
3.
Hold down (A) for at least 10 seconds until
the second hand performs one full
rotation.
Crown
4.
Push the crown back in.
Note
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
Second hand
Crown
Adjusting Hand and
Day Indicator
Alignment
Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
Adjusting Hand and Day
Indicator Alignment
1.
Pull out the crown to the second click.
This causes the second hand to move to
12 o'clock.
2.
Hold down (B) for at least five seconds
until the watch beeps. Release the button
when you hear the beep.
This causes the second hand to perform
one full revolution and enables
adjustment of second hand alignment.
Second hand
3.
Rotate the crown to align the second hand
with 12 o'clock.
4.
Press (B).
This enables adjustment of hour hand,
minute hand, and 24-hour hand
alignment.
Minute hand
Hour hand
Crown
24-hour
hand
14
Advertisement
Table of Contents
