Configuring Watch Settings; Changing The Home City Summer Time Setting; Checking The Watch Charge Level; Connection - Casio 5639 Operation Manual

Configuring Watch Settings

You can use EDIFICE Connected to specify
the amount of time until the Bluetooth
connection is automatically terminated, and to
configure other settings.
1. Y
Tap the "EDIFICE Connected" icon.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
1. Y
Tap the "EDIFICE Connected" icon.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Operation Guide 5639
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with EDIFICE Connected.
1. Y
Tap the "EDIFICE Connected" icon.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3. Y
Use EDIFICE Connected to check the
charge level.

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
Important!
If you have problems establishing a
●
connection, it could mean that
EDIFICE Connected is not running on
the phone. On the phone's Home
Screen, tap the "EDIFICE Connected"
icon. After the app starts up, hold down
the watch's (B) button for at least two
seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
EDIFICE Connected: "Watch settings"
"Connection time". Next, select a
n
setting of 3 minutes, 5 minutes, or 10
minutes.
Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected Disconnected
10