Table of Contents
Advertisement
Enabling the Hourly Time
Signal
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (D) to display the hourly time signal
screen ([SIG]).
3.
Press (A) to toggle the hourly time signal
between enabled and disabled.
(hourly time signal) is shown on the
●
display while the hourly time signal is
turned on.
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
●
sound again, turn it back on.
Note
Indicators are displayed while any of
●
the alarms or the hourly time signal is
turned on.
The applicable indicators are not
●
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Alarm
Hourly time signal
Watch Operation Guide 3552
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (D) to scroll through the alarm ([AL1]
to [AL5]) and hourly time signal ([SIG])
screens until the one you want to turn off
is displayed.
Alarm number or hourly time signal
3.
Press (A) to turn off the displayed alarm or
the hourly time signal.
Each press of (A) toggles between on
●
and off.
Turning off an alarm causes
●
(alarm) to disappear from the display.
Turning off the hourly time signal
causes
disappear.
Note
If
●
you turn off an alarm, it means that at
least one of the other alarms is still
turned on. To turn off all of the alarms,
repeat steps 2 and 3 until the
(alarm) indicator is no longer
displayed.
(hourly time signal) to
(alarm) is still displayed after
Moving to Another
Time Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
Before Boarding
●
1.
Configure the World Time (Dual Time) to
the current time at your destination.
Destination time
Current time
Using CASIO WATCHES to Configure
l
Settings
Using Watch Operations to Configure
l
Settings
2.
Disable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
19
Advertisement
Table of Contents
