Using Watch Operations to
Adjust the Time and Day
Settings
1.
Pull out the crown to the second click.
This causes the second hand to move to
12 o'clock, and enables the hour and
minute setting operation.
Second hand
Each press of (A) cycles through
●
available setting items in the sequence
shown below.
Hours, minutes
10 years
1 year
Month
Day
2.
Rotate the crown to change the hour and
minute settings.
While checking if the 24-hour hand is
●
indicating a.m. (right side) or p.m. (left
side), set the desired time.
3.
Press (A).
This enables the year ten's digit setting
operation.
4.
Rotate the crown to move the second
hand to the desired setting for the year
ten's digit.
Year (10's digit)
00
10
90
80
70
50
60
Operation Guide 5639
5.
Press (A).
This enables the year one's digit setting
operation.
6.
Rotate the crown to move the second
hand to the desired setting for the year
one's digit.
Crown
7.
Press (A).
This enables the month setting operation.
8.
Rotate the crown to change the month.
9.
Press (A).
This causes the second hand to move to
12 o'clock, and enables the day setting
operation. The function hand will move
slightly at this time.
The function hand will move repeatedly
●
while the day setting is being changed.
l
10.
Rotate the crown to change the day.
11.
On a time signal at the top of a minute,
push the crown back in.
20
30
40
Year (one's digit)
0
1
2
9
3
8
4
7
5
6
12
11
1
10
2
9
3
8
4
7
5
6
Month
Hand and Day Indicator Movement
Day
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch's other settings.
Note
This function is available only while
●
EDIFICE Connected is running on the
phone.
This section describes watch and
●
phone operations.
: Watch operation
X
: Phone operation
Y
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
Install the required app on your
●
A
phone.
In Google Play or the App Store, search for the
CASIO "EDIFICE Connected" app and install
it on your phone.
Configure Bluetooth settings.
●
B
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
6