Table of Contents
Advertisement
Precautions when using Mobile Link
●
When using this watch in combination with
●
a phone, keep the watch and phone close
to each other. A range of two meters is
recommended as a guideline, but the local
environment (walls, furniture, etc.), the
structure of a building, and other factors
may require a much closer range.
This watch can be affected by other devices
●
(electrical devices, audio-visual equipment,
office equipment, etc.) In particular, it can
be affected by operation of a microwave
oven. The watch may not be able to
communicate normally with a phone if a
microwave oven is operating nearby.
Conversely, this watch may cause noise in
radio reception and the video image of a TV.
Bluetooth of this watch uses the same
●
frequency band (2.4 GHz) as wireless LAN
devices, and use of such devices in close
proximity of this watch may result in radio
interference, slower communication
speeds and noise for the watch and the
wireless LAN device, or even
communication failure.
Stopping Radio Wave Emission by This
●
Watch
The watch is emitting radio waves whenever
the second hand is pointing to [R] or
In addition, the watch also connects phone
automatically four times a day to adjust its time
setting.
When in a hospital, on an aircraft, or in any
other area where the use of radio waves is not
allowed, use the operation below to stop radio
wave generation.
Stopping Radio Wave Generation
●
Press any button to terminate the Bluetooth
connection.
Connected
Disconnected
Disabling Auto Time Adjustment
●
Configure EDIFICE Connected settings to
disable time adjustment between the watch
and phone.
Using the Watch in a Medical Facility or
l
Aircraft
Operation Guide 5639
Copyrights and Registered
Copyrights
The Bluetooth
●
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.
iPhone and App Store are trademarks of
●
Apple Inc. in the United States and other
countries.
iOS is a trademark or registered trademark
●
of Cisco Systems, Inc.
GALAXY is a registered trademark of
●
Samsung Electronics Co., Ltd.
Android and Google Play
●
or registered trademarks of Google LLC.
Other company names and product names
●
used herein are trademarks or registered
trademarks of their respective companies.
.
e
®
word mark and logos are
TM
are trademarks
Troubleshooting
I can't pair the watch with a
phone.
Q1
I've never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install EDIFICE Connected on
your phone?
EDIFICE Connected needs to be installed
on your phone in order to connect with the
watch.
Install the required app on your
l
A
phone.
Are your phone's Bluetooth settings
configured correctly?
Configure the phone's Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
"Settings"
"Bluetooth"
n
n
●
"Settings"
"Privacy"
n
n
●
"EDIFICE Connected"
n
n
Android Users
Enable Bluetooth.
●
Other than the above.
Some phones need to have BT Smart
disabled to use EDIFICE Connected. For
details about setting procedures, see your
phone documentation.
On the Home Screen, tap: "Menu"
"Settings"
"Bluetooth"
n
n
"BT Smart settings"
"Disable".
n
On
"Bluetooth"
On
n
"Menu"
n
17
Advertisement
Table of Contents
