World Time; Using The Casio Watches Phone App To; Checking World Time; Specifying A World Time City - Casio 5713 Operation Manual

World Time

You can view the current time in 55 cities (38
time zones), and UTC (Coordinated Universal
Time) time.
Using the CASIO WATCHES
Phone App to Configure
World Time City Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set the World
Time city.
Configuring World Time Settings
l
Note
World Time cities that can be selected
●
only by using CASIO WATCHES
cannot be selected using watch
operations.

Checking World Time

1.
Enter the World Time Mode.
Navigating Between Modes
l
After the currently selected World Time
City name appears, the watch will display
the current time in that city.
The hour and minute hands will indicate
●
the current Home City time.
World Time City
World Time
Watch Operation Guide 5713

Specifying a World Time City

Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also enable
or disable summer time.
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Loosen the crown and then pull it out.
This displays the currently selected World
Time City.
3.
Rotate the crown to display the city you
want to use.
For information about city codes, refer
●
to the information below.
City Table
l
4.
Press (B).
5.
Rotate the crown to select a summer time
setting.
Rotating the crown cycles through the
setting items shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
6.
Push the crown back in and then lock it.
World Time City
Crown
Note
If you do not perform any operation for
●
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
Specifying UTC (Coordinated Universal
●
Time) as Your World Time City
To set UTC (Coordinated Universal Time) as
your World Time City, enter the World Time
Mode and then hold down (A) for at least three
seconds.
Swapping Your Home Time
and World Time
In the World Time mode, hold down (D) for at
least three seconds. [
on the display, and your Home City time will
be swapped with your World Time.
Before swapping After swapping
Home Time World Time
World Time Home Time
] will appear
29