World Time; Checking World Time; Setting The World Time City; Alarm - Casio 3561 Operation Manual

World Time

World Time lets you look up the current time
in any one of 30 cities (29 time zones) around
the globe.

Checking World Time

1.
Enter the World Time Mode.
Navigating Between Modes
l
Entering the World Time Mode displays
the city code of the currently selected
World Time city.
Each press of (D) scrolls through city
●
codes.
For information about city codes, see
●
the information below.
City Table
l
City code
Watch Operation Guide 3561

Setting the World Time City

Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Press (D) to display the city code of the
currently selected city.
Holding down (D) scrolls through
●
settings at high speed.
For information about city codes, see
●
the information below.
City Table
l
3.
If you want to configure the summer time
setting, hold down (A) for at least one
second.
[DST] is displayed along with summer
time.
Each time you hold down (A) for at least
●
one second, the setting will toggle
between standard time and summer
time.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
The summer time setting you configure
●
is applied to the currently selected city
only. It does not affect other cities.
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.

Configuring Alarm Settings

1.
City code
2.
3.

Alarm

Enter the Alarm Mode.
Navigating Between Modes
l
Press (D) to scroll through alarm numbers
([1] to [5]) until the alarm you want to
configure is displayed.
Alarm time
Alarm number
Hold down (A) for at least one second.
This causes the hours digits to flash.
Alarm hour
8