Receiving Casio Watches Information On The Watch; Mode Customization - Casio 5713 Operation Manual

Triggering Immediate Time Adjustment
●
The watch's time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1. X
Enter the Receive Mode.
Navigating Between Modes
l
2.
Move the phone close to (within one meter
of) the watch.
3. X
Press (A).
[TIME] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] will appear, and then the
watch will adjust its time setting based on
information from the phone.
At this time your current location is
●
recorded by your phone.
Trying to connect After time adjustment
Note
The connection is terminated
●
automatically after time adjustment is
complete.
If time adjustment fails for some
●
reason, [ERR] will appear.
[RCVD] flashes when the receive
●
operation starts, and [RCVD] stops
flashing after it is complete.
Watch Operation Guide 5713
Receiving CASIO WATCHES
Information on the Watch
You can configure settings so the watch
receives CASIO WATCHES update and other
information whenever it connects with a phone
to adjust its current time setting.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (B) for at least five seconds.
Release the button when the second hand
points to
display.
When a connection is established
●
between the watch and phone, [CNCT]
will stop flashing.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on your
phone screen to enable app info receive.
Note
If app info receive is turned on, the
●
watch receives CASIO WATCHES
information as described below.
Each time the watch automatically
ー
adjusts its time setting (four times a
day)
When you press (A) in the
ー
Timekeeping Mode to adjust the
watch time setting
When you hold down (B) for at least
ー
five seconds to connect the watch
with a phone
When CASIO WATCHES information
●
is received while the watch is in the
Timekeeping Mode, the watch
automatically switches to the app info
screen.
Normal Timekeeping
Display
, and [CNCT] flashes on the
Connected
App Info Screen

Mode Customization

You can use CASIO WATCHES to customize
modes by rearranging them on the screen,
and by deleting or adding modes.
Important!
You cannot perform mode
●
customization operations on the
watch. Use CASIO WATCHES to
configure settings.
The modes below can be rearranged or
deleted.
Barometer Mode
●
Thermometer Mode
●
Altitude Record Recall Mode
●
Sunrise/Sunset Mode
●
Stopwatch Mode
●
Timer Mode
●
Alarm Mode
●
World Time Mode
●
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (B) for at least five seconds.
Release the button when the second hand
points to , and [CNCT] flashes on the
display.
When a connection is established
●
between the watch and phone, [CNCT]
will stop flashing.
Trying to connect
3. Y
Perform the operations shown on the
phone screen to configure mode settings.
Connected
16