Table of Contents
Advertisement
13.1.2 Using the measurement sheets
Bosch Motorsport
2.
To create the sheets, right-click on VCU MS 50.4 and select 'Create measurement
views...' from the VCU MS 50.4 context menu.
The automatically created sheet is inserted in the Project Tree under 'Measurement
Container' and 'Device Channels'. If the VCU MS 50.4 is connected to RaceCon and
the status is green, live values of the channels are shown.
1.
When RaceCon is online, press the 'F11' key to switch from 'Design Mode' into 'Race
Mode'. The measurement sheet is extended to full screen. The button for offset calib-
ration is active.
2.
Switch between different sheets using the tabs at the bottom of the window.
3.
Press the 'Esc' key to return to 'Design Mode'.
Vehicle_Control_Unit_VCU_MS_50.4_Manual
Online Measurement and Calibration | 13
Click to create
measurement sheets
77 / 136
Advertisement
Table of Contents
