Table of Contents
Advertisement
11 | Analog and Frequency Inputs
62 / 136
A 'Multipoint Adjustment Wizard' opens.
4.
To activate the internal pullup-resistor, check the box. The internal pullup-resistor is
used to get a 5 V signal at the analog channel of the VCU MS 50.4. It allows you to
use a push-button. The fixed value of the internal pullup-resistor is 3.01 kOhm. If us-
ing an additional external pullup-resistor, set up the overall resistance.
5.
Click 'Next' when done.
The second part of the 'Multipoint Adjustment Wizard' opens.
Physical
(channel)
value
6.
Click 'Next' when done.
The third part of the 'Multipoint Adjustment Wizard' opens.
Vehicle_Control_Unit_VCU_MS_50.4_Manual
Choose unit group
and unit of physical
value
Select type of curve
Enter physical
adjustment values
her (can still be
edited later)
Electrical (pin) value
Bosch Motorsport
Advertisement
Table of Contents
