Bosch MS 50.4 Manual page 106

16 | Lap Trigger
106 / 136
e) Define presettings for trigger. See chapter 'Lap trigger presettings' for details.
f) Define condition settings; change signal for vehicle speed, define speed settings. See
chapter 'Distance based retrigger protection' and 'Distance based forced trigger' for de-
tails.
g) Define settings for main trigger. See chapter 'Lap timing' for details.
h) Define settings for counddown timer. See chapter 'Countdown timer' for details.
i) Define settings for sub trigger. See chapter 'Segment timing' for details.
j) Define settings for a GPS lap trigger. See chapter 'GPS lap trigger' for details. Only ap-
plicable if the signal source is set to 'GPS lap trigger'.
Click 'Finish' to complete the operation. A pre-configured lap trigger window opens.
Preset values for lap counter
and outing counter
Minimum laptime that a new
'best laptime' is accepted
Preset value for 'best laptime'
Change signal for vehicle speed,
if desired.
Enter minimum speed for
trigger release.
Define settings for distance
based retrigger protection.
Define settings for distance
based forced trigger.
Define settings for lap timing
(main trigger).
Define settings for sub trigger.
Not applicable with a GPS lap trigger.
Vehicle_Control_Unit_VCU_MS_50.4_Manual Bosch Motorsport