Starting Up; Setting Up A New Racecon Project - Bosch MS 50.4 Manual

8 | Starting Up

18 / 136
8 Starting Up
Install the software required for the VCU MS 50.4 operation. It is developed for Windows
system software. Following software versions are used in this manual:
– VCU MS 50.4 setup, configuration and calibration: RaceCon
– Measurement data analysis: WinDarab
Set up the 100 Mbit Ethernet connection to the VCU MS 50.4.
– The Ethernet port has 'cable auto crossover' functionality.

8.1 Setting up a new RaceCon Project

The following screenshot shows an overview of the RaceCon Main Screen with its areas.
All (sub-) windows are resizable and dockable. You can find them under the 'Windows'
tab.
Main Area
Project
Tree
Data Area
1. Start the RaceCon software.
Vehicle_Control_Unit_VCU_MS_50.4_Manual
Toolbox
Message Area
Bosch Motorsport