Project Configuration | 9
The parameter-based trigger points need to be set manually in RaceCon, the macro-
based trigger points will store latitude and longitude values when the configurable trigger
condition comes true (i.e. steering wheel button). This trigger condition and the detection
range need to be configured in RaceCon.
The GPS trigger points can also be used for segment triggering. If used as segment trig-
gers and i.e. 3 trigger points are selected, the laptrigger module will use the first 3 trigger
points on the list.
Bosch Motorsport
Vehicle_Control_Unit_VCU_MS_50.4_Manual
39 / 136