Bosch MS 50.4 Manual page 46

10 | CAN Configuration
10.2.4 Online view of CAN channels in vehicle
46 / 136
g) Check the box to automatically adjust the limits of the channel.
CAN analyzer functionality
This functionality is only available, if a MSA-Box (I or II) is used to connect the VCU MS
50.4 to the PC. Choose the CAN bus that is connected to the MSA-Box to display the raw
value and the converted physical value here.
Automatic creation of online measurement sheets
The CAN channel can be automatically inserted into a measurement sheet. Insert a name
for a new sheet or select an existing sheet from the list box.
For an online view of the value measured by the VCU MS 50.4, insert the channel in an on-
line measurement sheet which is described in the chapter Setting up an online measure-
ment [} 73].
1. Double-click on 'Sheet 1' in Project Tree. Measurement Sheet 1 is displayed in Main
Area.
2. Click on 'Measurement elements' in the Toolbox.
3. Drag the desired Measurement element (e.g. Numeric Indicator) and drop it on the
Measurement Sheet.
Vehicle_Control_Unit_VCU_MS_50.4_Manual Bosch Motorsport