Call Block; Block Unknown Calls; Add A Call Block Entry; Review Call Block List - VTech CS5319 User Manual

Call block

If you have subscribed to caller ID
service, you can set the telephone
to block unknown calls and certain
undesired calls. The call block list can
store up to 20 entries.
When a call is blocked, the caller will
hear a simulated busy tone for one ring
cycle. The call recipient may pick up the
call during the first ring when there is no
caller ID information. Otherwise, the call
is disconnected.

Block unknown calls

All incoming calls with unknown
numbers will be blocked.
1. Press MENU when the handset is not
in use.
2. Press or to choose Call block,
then press SELECT.
3. Press or to choose Calls w/o
num, then press SELECT.
4. Press or to choose Unblock or
Block, then press SELECT. You hear
a confirmation tone.

Add a call block entry

1. Press MENU when the phone is not
in use.
2. Press or to choose Call block,
and then press SELECT.
3. Press SELECT to choose

Block list.

4. Press or to choose Add new
entry, and then press SELECT.
5. When Enter number displays, use
the dialing keys to enter a number (up
to 30 digits).
-OR-
Copy a number from the redial list
by pressing REDIAL. Then press ,
, or REDIAL repeatedly to find the
desired number. Press SELECT to
copy the number.
6. Press SELECT to move on to the
name.
7. When Enter name displays, use the
dialing keys to enter a name (up to
15 characters). Additional key
presses show other characters on
that key. The first character of every
word is capitalized.
8. Press SELECT to save. You hear
a confirmation tone and then the
handset returns to the previous
menu.
While entering names and numbers,
you can:
• Press or to move the cursor to
the left or right.
• Press DELETE to erase a digit.
• Press and hold DELETE to erase all
digits.
• Press and hold PAUSE to enter a
dialing pause (a p appears).
• Press 0 to add a space.

Review call block list

1. Press MENU when the phone is not
in use.
to choose Call block,
2. Press or
and then press SELECT.
to choose Block list,
3. Press or
and then press SELECT.
4. Press or to choose Review, and
then press SELECT.
5. Press or to browse through the
directory.
NOTE
• The handset displays List empty if there
are no block entries.
20

Edit a call block list entry

1. Search for the desired call block entry
(see Review call block list).
2. When the desired entry displays,
press SELECT. The handset displays
Enter number.
3. Use the dialing keys to edit the
number.
4. Press SELECT. The handset displays
Enter name.
5. Use the dialing keys to edit the name.
6. Press SELECT to save.

Save a caller ID log entry to call

block list
1. Search for the desired caller ID log
entry (see Review the Caller ID log).
2. When the desired entry displays,
press SELECT.
3. Press or to scroll to To Call
block, then press SELECT.
The handset displays Enter Number.
4.
Use the dialing keys to edit the
number, when necessary. Press
SELECT to move to the name. The
handset displays Enter name.
5. Use the dialing keys to add or edit the
name.
6. Press SELECT when done. You hear
a confirmation tone.

Delete a call block list entry

1. Search for the desired call block entry
(see Review the call block list).
2. Press DELETE. You hear a
confirmation tone and the handset
displays the next entry.
NOTE
• If the call block list is empty after an entry
is deleted, the handset displays List
empty. You hear a confirmation tone.

Mute rings of blocked calls

An incoming call will ring once and then
the system will check if the call should
be blocked. You can mute the first ring
of blocked calls.
1. Press MENU when the handset is not
in use.
2. Press 7464# on the handset.
3. Press or to choose First ring:
On or First ring:Off and then
press SELECT to save. You hear a
confirmation tone.
21