Table of Contents
Advertisement
1.2.1
Owner's responsibility
Please pay attention to the Safety Warnings contained within
this instruction manual. Keep this manual for your records and
provide it to your qualified service agency for use in profession-
ally setting up and maintaining your burner.
Your burner will provide years of efficient operation if it is profes-
sionally installed and maintained by a qualified service techni-
cian. If at any time the burner does not appear to be operating
properly, immediately contact your qualified service agency for
consultation.
We recommend annual inspection/service of your gas heating
system by a qualifi ed service agency.
Failure to follow these instructions, misuse, or incorrect adjust-
ment of the burner could lead to equipment malfunction and re-
sult in asphyxiation, explosion or fire.
If you smell gas:
Do not touch any electrical items.
Open all windows.
Close all gas supply valves.
WARNING
Contact your local gas authority immediately.
•
Do not store flammable or hazardous materials
in the vicinity of fuel burning appliances.
•
Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, personal injury or death.
•
Refer to this manual for instructional or addition-
al information.
•
Consult a certified installer, service representa-
tive or the gas supplier for further assistance.
•
Burner shall be installed in accordance with
manufacturers requirements as outlined in this
manual, local codes and authorities having ju-
risdiction.
CANADA: The equipment shall be installed in ac-
cordance with the Provincial Installation Require-
ments, or in their absence, the CAN/CGA B149.1 &
B149.2 Installation Codes shall prevail. Authorities
WARNING
having jurisdiction should be consulted before in-
stallation is made.
USA: This burner must conform with local codes,
or, in the absence of local codes, with the Standard:
National Fuel Gas Code NFPA 54/ANSI Z223.1 or
International Fuel Gas Code, as appropriate.
If an external electrical source is utilized, the con-
version burner, when installed, must be electrically
grounded in accordance with local codes or, in the
absence of local codes, with the national Electrical
Code, ANSI/NFPA No. 70-1990 and CSA Electrical
Code C22.2 No.0 M1982 & C22.2 No 3. 1988. Au-
thorities having jurisdiction should be consult-
ed before installations are made. The owner is
required to retain this manual for future refer-
ence.
Information and general warnings
5
GB
20051011
Advertisement
Table of Contents
