Supply Cables And External Connections Passage - Riello 20047690 Installation, Use And Maintenance Instructions

4.9.1 Supply cables and external connections
passage
All the cables to be connected to the burner must be threaded
through cable grommets. The use of the cable grommets can take
various forms by way of example we indicate the following mode.
4
3
2
1
System connection
terminal streep
Key (Fig. 17)
1 Single phase power supply, thermostat/pressure switch TL
2 Thermostat/pressure switch
3 Consents/safety
4 Available
20051011
Installation
Possibility of fixing
the electrical cables
S8685
Cable lengths
Mains supply line
Load controller X5-03
Safety Loop
Remote reset (lay separate cable)
Other lines
24 GB
20050586
Fig. 17
Max. 100 m (100 pF/m)
Max. 30 m (100 pF/m)
Max. 30 m (100 pF/m)
Max. 30 m (100 pF/m)
Max. 30 m (100 pF/m)